Facts about the Haakaa Breast Pump

on February 03, 2022 .

 


You may have heard two different concepts about the Haakaa Pump and its main function:

1. Haakaa isn’t a pump – it’s for catching let-down.
2. Haakaa is a pump + may cause an oversupply.

So what's correct?
Both - but it’s down to how you use it! We designed the Haakaa both as a pump AND a tool to save your let-down and our feedback from mums worldwide tells us it’s effective for both functions.

Catching let-down with Haakaa
Simply use with little to no suction (use a pumping bra to keep it in place) for couple of mins to catch let-down, then remove.

Pumping with Haakaa
Use the flip technique and + squeeze out air from the centre of the pump before applying – a harder squeeze = stronger suction. Squeeze + release a few times at the start if you need. You can also re-attach if suction eases.


Haakaa and your supply
Breastmilk works on supply and demand so like any pumping method, the Haakaa’s suction does extract milk which may increase your supply. It’s not the Haakaa – or any other pump – that directly causes an over supply, it’s how you use it. Always chat with an LC for any supply issues.

To increase supply, you need to extract more milk – feed or pump more often. You can pop your Haakaa on each breast after a feed to signal to your body to make more milk. It will take time to build up your supply, Mama!

To decrease your supply, pump less, with less suction. It’s important to slowly decrease the length of time pumping by a few mins every few days, or try block feeding. Decreasing too fast can lead to engorgement, clogged ducts and potential mastitis. BUT if you are feeling full, you can apply the Haakaa to relieve some pressure.

We hope this post will help with some of the misinformation out there.
 
Thanks for your support by Aliza Carr (Midwife & Perinatal Mental Health Specialist) from @bumpnbub and Courtney Garland (RN & IBCLC) from @mamalinc. Follow them for more educational content on birth, bubs, breastfeeding + more!

Comments

Attention: You need to logged in to comment!